Panasonic PT-TW342

76 - ENGLISH
Note
f The USB memory can be inserted or removed regardless of the power status of the projector.
Displaying the Memory Viewer screen
1) Press the <MEMORY VIEWER/USB DISPLAY/NETWORK> button on the remote control or switch the
input source to [Memory Viewer].
f Press the <INPUT/ENTER> button on the control panel and select the input source in the Input menu.
2) Insert the USB memory directly into the <USB A (VIEWER/WIRELESS)> terminal.
f The standby screen “please press RC ENTER ” is displayed while the USB memory icon is displayed at the lower left of
the screen.
f When the partition are separated in USB memory, several USB icons will be displayed.
3) Press the <ENTER> button on the remote control.
f The root directory of the USB memory will be displayed in thumbnail on the screen.
Playing the pictures
It will display a picture when play the picture manually every time.
1) Press asqw on the remote control to select a file.
2) Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
3) Press w to switch to the next picture, press q to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f Return to the thumbnail screen.
Executing the slide
All pictures in the same folder will play automatically when [Sort Order] and [Slide Transition Effect] and so on of [Memory
Viewer] menu are set to the special setting.
1) Press asqw on the remote control to select a file.
2) Press the <MENU> button to select the [Memory Viewer] → [Set Slide].
3) Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
f Press the <ENTER> button to return to the thumbnail screen.
Note
f If you press the <MENU> button during the slide show, the image will stop and the a menu displays. The playing will
continue when the menu disappears.
f When the slide show is playing the les in the second or subsequent thumbnail pages, if the settings of the [Memory viewer]
menu are changed, the slide show will resume from the rst le in the rst thumbnail page.
Playing the video
Playing the video le.
1) Press asqw on the remote control to select a file.
2) Press the <ENTER> button on the remote control.
f Playing on the full screen.
f To operate the controller which is displayed on the bottom of the screen with the remote control.
Video playing is terminated, and return to the thumbnail screen.
/
Pauses / plays the video.
10 seconds backward / forward skip and will continue to play thereafter.
60 seconds backward / forward skip and will continue to play thereafter.
/
The frame will switch between display and non-display each time you press the icon. The
video can be played repeatedly when the frame is displayed.
Chapter 5 Operation of Function - About Memory Viewer function