Panasonic PT-VMZ40

Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible
to turn off the image and audio temporarily.
button
1) Press the <SHUTTER> button.
f The image and audio disappear.
f This operation can be also performed by pressing the <SHUTTER> button on the control panel.
2) Press the <SHUTTER> button again.
f The image and audio reappear.
Note
f The power indicator <ON (G)/STANDBY (R)> will blink (0.75 seconds (light) → 0.75 seconds (off)) in green while the shutter function is in
use (shutter: closed).
f Even when the shutter function is in use (shutter: closed), the power <v/b> button and input select (<HDMI 1>, <HDMI 2>, <DIGITAL
LINK>, <COMPUTER 1/2>, <VIDEO>, < NETWORK / USB>) buttons can be operated.
f The light source may be lit dimly due to warm up when the shutter function is used in the operating environment temperature of around 0 °C
(32 °F).
Using the mute function
This button allows you to turn off the audio output temporarily.
button
1) Press the <MUTE> button.
f The audio turns off.
2) Press the <MUTE> button again.
f The audio turns on.
52 - ENGLISH
Chapter 3 Basic Operations - Operating with the remote control