Panasonic PT-VW355N

[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw or the <ENTER> button.
f The [PICTURE MODE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD] The picture becomes suitable for moving images in general.
[DYNAMIC] The light output is maximized for use in bright areas.
[BLACKBOARD] The picture becomes suitable for projecting on a black board.
[WHITE BOARD] The picture becomes suitable for projecting on a white board.
[CINEMA]*
1
The picture becomes suitable for movie sources.
[NATURAL]*
2
The picture becomes suitable for use in low-light areas.
[EASY SETTING]*
3
When executing the EASY SETTING function, it will be the optimal hue for the projected image
according to the projection environment.*
4
*1 Only for the movie-based signals.
*2 Only for the still image signals.
*3 When the projector leaves the factory, [EASY SETTING] does not appear. When execute the EASY SETTING function
by setting [COLORBOARD] to [ON] in [EASY SETTING], [EASY SETTING] is added to the items.
*4 If you use the projector in different environment, the screen may change. Please execute the EASY SETTING function
again by setting [COLORBOARD] to [ON] in [EASY SETTING].
[CONTRAST]
You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Adjustment range
Press the w button.
Brightens the screen and makes the color of image deeper.
-32 ~ +32
Press the q button.
Darkens the screen and makes the color of image lighter.
Attention
f Adjust [BRIGHTNESS] rst when you need to adjust [BRIGHTNESS] and [CONTRAST].
60 - ENGLISH
Chapter 4 Settings - [PICTURE] menu