Panasonic PT-VX400U

-51-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
5 High Fan2 Max 9999 -
6 High Fan3 Min 9999 -
7 High Fan3 Max 9999 -
10
Normal Fan Control Min
Temp
Temp Sensor Control Start/End Temp
at Normal
28 27 27/27 26/27 20-100
11
Normal Fan Control Max
Temp
36 35 32/32 32/32 20-100
12 Normal Fan1 Min
Fan voltage value at Normal (unit:
0.1V)
65 65 78/90 78/90 0-255
13 Normal Fan1 Max 130 130
135
/135
135
/135
0-255
14 Normal Fan2 Min 67 70
85/100 85/100 0-255
15 Normal Fan2 Max 120 120
130/135 130/135 0-255
16 Normal Fan3 Min 75 75 95/110 95/110 0-255
17 Normal Fan3 Max 80 80
100
/117
100
/117
0-255
20 Eco Fan Control Min Temp
Temp Sensor Control Start/End Temp
at Eco
28 28 26/26 26/26 20-100
21 Eco Fan Control Max Temp 35 35 32/32 32/32 20-100
22 Eco Fan1 Min
Fan voltage value at Eco (unit: 0.1V)
50 50
67/80 67/80 0-255
23 Eco Fan1 Max 120 120
125
/130
125
/130
0-255
24 Eco Fan2 Min 55 57 67/85 67/85 0-255
25 Eco Fan2 Max 100 100
110
/120
110
/120
0-255
26 Eco Fan3 Min 38 38 50/58 50/58 0-255
27 Eco Fan3 Max 40 40 54/62 54/62 0-255
Group
255
Fan Start/Cooling Setting
0 Fan1 Initial Volt
Fan Start Voltage(0.1V)
60 0-255
1 Fan2 Initial Volt 60 0-255
2 Fan3 Initial Volt 50 0-255
4 Fan1 Cooling Speed
Fan Voltage at Power Off (0.1V)
135 0-255
5 Fan2 Cooling Speed 135 0-255
6 Fan3 Cooling Speed 135 0-255
8 Cooling Time L1
Cooling Time setting at Fan Mode L1 (x
30 sec) 1: 30, 3: 90, 15: 450 sec.
1 1-15
9 Cooling Time L2
Cooling Time setting at Fan Mode L2 (x
30 sec) 1: 30, 3: 90, 15: 450 sec.
3 1-15
10 Temp Error Cooling Time
Cooling Time setting at Temp Error
(x 30 sec)
3 1-15
11
OnStart Cooling Start
Threshold
39 0-100
12 After shutdown cooling Cooling after shutdown (0: No, 1: Yes) 1 0-1
Group
256
Fan/Lamp Voltage Dimmer Setting
0 Lamp Voltage - 0-255 * Read only
1 Lamp Vol Threshold 0 30-90
2 Fan 1 Speed Gain 10 0-255
3 Fan 2 Speed Gain 10 0-255
4 Fan 3 Speed Gain 10 0-255
Group
257
Fan Dimmer Setting
0
Dimmer Average Chech
Period
Dimmer Average measurement
Time (0:10sec. 1:30sec. 2:60 sec.
3:90sec...10:300sec.)
1 0-10
1 Dimmer Average Dimmer Average Value (Read only) -
2 Last Voltage Difference -
3 Voltage Difference Goal -
Group
259
Fan MIC IC temperature rising resolve
0 Standby Fan C Voltage Fan voltage (unit: 0.1V) 52 0-255
Group
260
Auto Calibration(Common)*Auto Calibration
0 Execute Calibration 0 0 - 1
Executes Auto-Calibration when
changiing the Value (PC White
100%)
1 Loop Count
Maximum Execution Times (OFFSET-
>GAIN)
10 1 - 30
2 Auto Status
Result of Auto-Calibration (Last
Memory)
0 0 / 1 / 9
0: OK, 1: Adjusting,9: Error *
ReadOnly
3 AutoWait Wait Value for each setting 1 1 - 20
4 CHECK -Tolelance Torelance of OFFSET 2 1 - 255
Group
261
Auto Calibration (RGB)