r The connection was lost when no operation was performed after connecting with MIRRORING
f The connection may be broken after specic time depending on the device in use. Check the power save
setting, etc., of the device.
f It may improve by updating the wireless driver or the rmware. Contact the support service of the manufacturer
of the device in use.
r The image contents cannot be displayed
f When using in moderator mode, the HDCP compliant DVD or copyright protected contents cannot be displayed.
r Others
f Depending on the device in use, a conrmation screen for reconnection with connection name of “from
UNKNOWN” may be displayed, however, you cannot reconnect from that screen.
f Depending on the device in use, it may be required to remove the device during connecting. In such a case,
delete the device following the instruction of the device.
160 -
ENGLISH
Chapter 6 Maintenance - FAQ
To Next Page
Loading...
