[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the submenu.
Refer to “Navigating through the menu” (Æ page 61) for the operation of the menu screen.
[COLOR ADJUSTMENT]
Correct the color difference between projectors when multiple projectors are used simultaneously.
1) Press as to select [COLOR ADJUSTMENT].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
Color adjustment is not carried out.
[3COLORS]
Adjusts the three colors [RED], [GREEN], or [BLUE] and the white [GAIN]. For details of this mode,
refer to “Adjusting [3COLORS]” (Æ page 78).
[6COLORS]
Adjusts [WHITE LEVEL] and the six colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA] or
[YELLOW]. For details, refer to “Adjusting [6COLORS]” (Æ page 78).
Adjusting [3COLORS]
1) Press as to select [COLOR ADJUSTMENT].
2) Press qw to select [3COLORS].
3) Press the <ENTER> button.
f The [3COLORS] screen is displayed.
4) Press as to select [RED], [GREEN], [BLUE] or [WHITE].
5) Press the <ENTER> button.
f The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE] or [3COLORS:WHITE] screen is
displayed.
f By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.
6) Press as to select [RED], [GREEN] or [BLUE].
f [GAIN] can be adjusted when [WHITE] is selected in Step 4).
7) Press qw to adjust.
f The adjustment value changes between 0
*1
and 2 048.
*1 The lower limit varies depending on the adjusting color.
Note
f Operation when correcting the adjustment color
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
f Pressing the <DEFAULT> button on the remote control will restore the factory default settings for all items.
f When [COLOR ADJUSTMENT] is set to [3COLORS], [COLOR CORRECTION] is xed to [OFF] and the [PICTURE] menu → [COLOR
TEMPERATURE] is xed to [DEFAULT].
Adjusting [6COLORS]
1) Press as to select [COLOR ADJUSTMENT].
2) Press qw to select [6COLORS].
3) Press the <ENTER> button.
f The [6COLORS] screen is displayed.
4) Press as to select [WHITE LEVEL].
78 -
ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
To Next Page
Loading...
