Panasonic RX-D50 - Disassembly of Woofer Speaker (SP1)

26
Step 4 : Desolder 2P wire at (ZJ901) on the Panel P.C.B..
Step 5 : Desolder 2P wire at (ZJ902) on the Panel P.C.B..
Step 6 : Release both 2P wires (ZJ901 and ZJ902) from
the slot of the Panel P.C.B..
Step 7 : Remove the Panel P.C.B., Volume P.C.B. and Standby
P.C.B. altogether.
8.7. Disassembly of Woofer
Speaker (SP1)
• Refer to “Disassembly of Top Cabinet Assembly”.
• Refer to “Disassembly of Front Panel Assembly”.
Step 1 : Desolder 2P wire on Woofer Speaker (SP1).
Step 2 : Remove 4 screws.
Step 3 : Remove Woofer Speaker (SP1).
All manuals and user guides at all-guides.com
all-guides.com