Panasonic RX-D50 - Checking & Repairing CD Servo P.C.B

49
10.5. Checking & Repairing CD
Servo P.C.B.
Step 1 : Remove the Top Cabinet Assembly.
Step 2 : Remove the Main P.C.B..
Step 3 : Remove the CD Mechanism Unit.
Step 4 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 5 : Connect 4P cable at the connector (CN4104) on the
Main P.C.B..
Step 6 : Connect 10P cable at the connector (CN2105) on the
Main P.C.B..
Step 7 : Connect 8P cable at the connector (CN4100) on the
Main P.C.B..
Step 8 : Place the insulating material as shown in the diagram.
Step 9 : Connect 22P FFC at the connector (CN2101) on the
Main P.C.B..
Step 10 : Check and repair the CD Servo P.C.B. according to
the diagram shown.
All manuals and user guides at all-guides.com