Panasonic SA-PM35MD - Page 47

Pin
No.
Mark I/O Function
92 APCD O Laser power PWM output
terminal
93
EXEFMCK
I External FM clock input
terminal (Not used,
connected to GND through
registor)
94 PEFM1 O EFM loop filter output
terminal
95
EEMIREF
I EFM PLL reference current
input terminal
96
EEMPLLF
O EFM PLL filter output
terminal
97 PEFMS I EFM signal input terminal
98
AV
DD
0
I Power supply terminal
99 AVss0 — GND terminal
100 TEFSEL — Not used, open
11.4. IC10 (MN101D03DAA1) : SYSTEM CONTROL
Pin
No.
Mark I/O Function
1 DACRST O DAC reset signal output
terminal to IC4 (“L”:Reset)
2 DEO O DE emphasis signal output
terminal to IC4(“L”:DE
emphases)
3 MUTE — AD-DA mute output
terminal (Not used, open)
4 AD RST O Reset signal output terminal
5
NRFSTBY
O Standby control signal
output terminal (“L”:
Standby)
6 PC O Transistor drive signal
output terminal (“H”:Power
ON)
7 MSP
RST
O MSP reset signal output
terminal (“L”:Reset)
8 LOAD1 O Loading motor drive 1
output terminal
9 LOAD0 O Loading motor drive 0
output terminal
10 NEFMON O Magnetic head current
output terminal
11 TEST01 O Test signal output terminal
(Not used, open)
47