Panasonic SA-PT150GCP

8.3.2. DVD Module Error Code Table
Error
Code
U702
DVD/DVI I2C The communication error of I2C Press
[
STOP
]
on
communication error when connecting it with DVD/ main unit for next error.
DVI. For instance, when EDID
information to which information on the
TV set side has been described
cannot be read, it is generated.
U703
DVD/DVI attestation When attestation
(
HDCP
)
with the TV Press
[
STOP
]
on
error side fails when connecting it with main unit for next error.
DVD/DVI, it is generated.
U704
DVD/DVI SRM It is
g
enerated at the e
q
ui
p
ment to Press
[
STOP
]
on
Riborcerar which the TV set is Riborced when main unit for next error.
connecting it with DVD/DVI.
U705
DVD/DVI SRM disk It is
g
enerated at the time of it is time Press
[
STOP
]
on
falsification check when illegal the SRM data of the main unit for next error.
error reproducing disk (verify error), when
connecting it with DVD/DVI.
F740 DVD device key I2C error when writing DVD Key Press [ STOP] on
device into transmitter. main unit for next error.
F893 FLASH ROM IC data Firmware error, DV5.0 LSI IC (IC8651) Press [ STOP] on
falsification error error. main unit for next error.
F894 EEPROM IC When failing in the access to Press [ STOP] on
abnormality error EEPROM IC located in the DVD main unit for next error.
Module P.C.B. (IC8611)
F895 Language area Firmware version agreement check for Press [ STOP] on
abnormal factory preset setting failure main unit for next error.
prevention.
F896 No existence model Firmware version agreement check for Press [ STOP] on
factory preset setting failure main unit for next error.
prevention.
F897 Initialization Incomplete initialization after writing of Press [ STOP] on
error new firmware (Factory preset setting main unit for next error.
failure prevention)
F898 Disagreement of Unsuitable combination of AV Decoder, Press [ STOP] on
hardware and SDRAM & FLASH ROM IC (firmware). main unit for next error.
software
F899 The communication Unsuitable combination of number of Press [ STOP] on
specification system com and panel com used. main unit for next error.
disagreement (Frimware)
between
micro-processor
Diagnosis Contents Description of error
Automatic FL Display
Remarks
31
SA-PT150GC / SA-PT150GCP / SA-PT150GCS / SA-PT150GCT / SA-PT150GS