Panasonic SA-PT150GCP

lGENERAL
Power Supply: AC 110 to 240 V, 50/60 Hz
Power Consumption: Main unit 105 W
Power Consumption in Standby Mode:
approx. 1 W
Dimensions (W×H×D):
430×60×342 mm
Mass: Main unit 3 kg
Operating Temperature Range: +5°C to +35°C
Operating Humidity Range: 5% to 90% RH (no
condensation)
lAMPLIFIER SECTION
RMS Output Power: Dolby Digital Mode
lTotal RMS Dolby Digital mode power:
330 W
At 1 kHz and total harmonic of 10%
lFront Ch: 55 W / Channel (5 Ω)
lCenter Ch: 55 W / Channel (5 Ω)
lSurround Ch: 55 W / Channel (5 Ω)
At 100 Hz and total harmonic of 10%
lSubwoofer Ch: 55 W / Channel (5 Ω)
PMPO Output Power: 2800 W
DIN Output Power: Dolby Digital Mode:
lTotal DIN Dolby Digital mode power:
150 W
At 1 kHz and total harmonic of 1%
© 2007 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SA-PT150GC
SA-PT150GCP
SA-PT150GCS
SA-PT150GCT
SA-PT150GS
Colour
(S).......................Silver Type
lFront Ch: 25 W / Channel (5 Ω)
lCenter Ch: 25 W / Channel (5 Ω)
lSurround Ch: 25 W / Channel (5 Ω)
At 100 Hz and total harmonic of 1%
lSubwoofer Ch: 25 W / Channel (5 Ω)
lFM TUNER, TERMINALS SECTION
Preset Memory: FM 30 stations
Frequency Modulation (FM)
Frequency range: 87.50-108.00 MHz
(50-kHz step)
Sensitivity: 1.8 µV (IHF)
S/N 26 dB: 1.4 µV
Antenna terminals: 75 Ω (unbalanced)
Mic Jack:
Sensitivity:
0.7 mV (1.2 kΩ)
Terminal: Mono, 6.3 mm jack (1 system)
lUSB SECTION
USB Port:
USB standard: USB 2.0 full speed
Media file format support: MP3 (*.mp3)
WMA (*.wma)
JPEG (*.Jpg, *.JPEG)
MPEG4 (*.asf)
DVD Home Theater Sound System
Specifications
ORDER NO. MD0705010CE

Panasonic SA-PT150GCP Specifications

General

Brand	Panasonic
Model	SA-PT150GCP
Category	Home Cinema speakers
Language	English

Summary

1 Safety Precautions

1.1 General Guidelines

General safety guidelines for servicing, including lead dress and insulation checks.

1.2 Before Repair and Adjustment (Using SMPS Module P.C.B.)

Cautions for working with the SMPS module and initial power-up procedures.

1.3 Protection Circuitry

1.5 Caution for AC Cord

Safety precautions for handling the AC cord and plug, especially for specific regions.

2 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices

3 Precaution of Laser Diode

5 Handling Precautions for Traverse Unit

5.1 Cautions to Be Taken in Handling the Optical Pickup Unit

Specific warnings about handling the optical pickup to prevent ESD damage.

5.2 Grounding for electrostatic breakdown prevention

Procedures for grounding worktables and human bodies to prevent ESD.

8 Self-Diagnosis and Special Mode Setting

8.1 Service Mode Summary Table

A summary table listing service modes, player buttons, and applications.

8.2 Service Mode Table

Detailed explanations of various service modes for checking unit functions.

8.2.1 Service Mode Table 1

Details of Service Mode Table 1, including jitter and error code checks.

8.2.2 Service Mode Table 2

Details of Service Mode Table 2, covering laser drive current measurements.

8.2.3 Service Mode Table 3

Details of Service Mode Table 3, for firmware and region display checks.

8.2.4 Service Mode Table 4

8.2.5 Service Mode Table 5

8.2.6 Optical Pick-up Self-Diagnosis

8.3 DVD Self Diagnostic Function-Error Code

8.3.1 Mechanism Error Code Table

8.3.2 DVD Module Error Code Table

8.3.3 Power Supply Error Code Table

8.3.4 ECC Error Code Table

8.3.5 USB Error Code Table

8.5 Service Precautions

9 Assembling and Disassembling

9.1 Disassembly Flow Chart

9.2 Main Components and P.C.B. Locations

9.15 Replacement of Digital Amp IC (IC5100)

9.16 Replacement of Regulator IC (IC2903)

10 Assembly and Disassembly of DVD Mechanism Unit

10.1 Disassembly Procedure

12 Measurements and Adjustments

12.1 Service Tools and Equipment

Lists the necessary tools and equipment for service and measurement tasks.

12.2 Important points in adjustment

Key considerations before performing optical and electrical adjustments.

12.4 Optical adjustment

Detailed steps for performing optical adjustments, including tilt and tangential.

14 Voltage and Waveform Chart

14.1. DVD Module P.C.B.

Voltage and waveform data specifically for the DVD Module PCB.

14.2. Main P.C.B.

Voltage and waveform data for test points on the Main PCB.

14.5. Waveform Chart

Visual representations of waveforms for various test points and ICs.

16 Wiring Connection Diagram

17 Block Diagram

17.1. System Control

Block diagram showing the system control circuitry and its connections.

17.2. DVD (Servo)

Block diagram illustrating the DVD servo system and its components.

17.3. DVD (Audio)

17.4. DVD (Video)

17.5. Audio

17.6. Amp & Power

Block diagram illustrating the amplifier stages and power supply distribution.

19 Schematic Diagram

19.1. DVD Module Circuit

Schematic diagram for the DVD module, showing its electronic components and connections.

19.2. Main Circuit

Schematic diagram of the main circuit board, including audio and control sections.

19.3. Tuner Extent, Panel & Volume Circuit

19.4. Mic, USB Relay, USB, Tray Loading & Optical Pickup Unit Circuit

20 Printed Circuit Board

20.1. DVD Module P.C.B.

20.2. Main P.C.B.

20.3. Panel, Volume & Tuner Extent P.C.B.

20.4. Mic, USB, USB Relay & Tray Loading P.C.B.

21 Basic Troubleshooting Guide

21.1. Basic Troubleshooting Guide for Traverse Unit (DVD Module P.C.B)

Troubleshooting steps for issues related to the traverse unit and DVD module.

21.2. Basic Troubleshooting Guide for SMPSMAINPANEL

Troubleshooting steps for power supply, main, and panel circuit problems.

22 Overall Block Diagram for PT150

22.1. SC-PT150 Simplified Block

A simplified block diagram illustrating the main functional blocks of the SC-PT150 unit.

23 Terminal Function of ICs

23.1. IC2018 (C2 CBYY000438): System Control IC

Pin terminal functions for the System Control IC (IC2018).

25 Replacement Parts List

25.1. Component Parts List

Detailed list of components, including part numbers, names, and remarks.