20
RQT8739
Connections
See pages 8 and 9 for placing and connecting your speakers according to their number.
Bi-wire speakers have separate connection terminals for high frequency and low frequency signals.
• Bi-wiring prevents high frequency and low frequency signals from interfering with each other. It offers playback in high audio quality.
• HF and LF stand for high frequency and low frequency, respectively.
• Make sure to select “YES ” in “Making bi-wire setting” (below) when you connect the unit to bi-wire speakers. The speakers do not
produce adequate sounds unless you make this setting.
• Make sure to connect speakers’ HF terminals with the unit’s FRONT B terminals, and speakers’ LF terminals with the unit’s FRONT A
terminals.
• Different amps for high frequency and low frequency signals produce BI-AMP stereo sounds that are clearer and higher in audio
quality when you play on 2 channels sources containing analog audio and 2-channel PCM signals (á page 27).
See “Making BI-AMP settings” (á page 36) for detailed settings.
Connecting speakers
To connect bi-wire speakers
Making bi-wire setting
1 Press and hold [-MENU/–SETUP, RETURN] for
about 2 seconds to enter the SETUP.
2 Select and confirm the choice.
3 Select and confirm the choice.
YES : When bi-wire speakers are connected
NO : When bi-wire speakers are not connected
Factory setting: NO
4 Select and finish the setting.
To Next Page
Loading...
