Pin
No.
Terminal
Name
I/O Function
72 AMP
ERR
I Digital amplifier error signal
input
73
AMP
SHTDN
I Digital amplifier shut down
signal input
74
FAN
DET
I Input for playback signal detect
75 AV
SS
- GND
76 KEY I Operation key signal input
77 VREF I Reference voltage input
78 AV
CC
I Power supply terminal
79 F61 I Power supply abnormal detect
signal input
80 FL
DATA
O Data signal output for IC901
17. Replacement Parts List
Notes:
- Important safety notice:
Components identified by
mark have special characteristics important for
safety.
Furthermore, special parts which have purposes of fire-retardant (resistors), high-
quality sound (capacitors), low-noise (resistors), etc. are used.
When replacing any of components, be sure to use only manufacture’s specified
parts shown in the parts list.
- The <IA> - <ID> marks in Remarks indicate language of operating instructions.
<IA>: German, Italian, French
<IB>: Swedish, Netherlands, Danish
<IC>: English
<ID>: Spanish, Polish, Czech
- The parenthesized indications in the Remarks columns specify the areas.
(E): SA-DT300E
(EB): SA-DT300EB
(EG): SA-DT300EG
- The marking in Ref No. indicate as follow.
*2: FL circuit
- The marking [RTL] indicates the retention time is limited for this item. After the
discontinuation of this assembly in production, it will no longer be available.
33