Panasonic SC-BT222

34
VQT2S28
TV Audio Input
Select the TV audio input to work with the VIERA Link
operations
TV System
Change the setting to match the equipment you are connecting
with.
≥ When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start*
Speed of startup from standby mode is increased.
≥ Internal control unit will be powered when it is set to “On” so
compared to when the setting is“Off” the following will occur.
jIdle power consumption will increase. (about the power
consumption > 44)
*The cooling fan may turn slowly to prevent overheating of
internal parts.
* Depending on the power conserving setting activated on
the TV, this function may have less effect when the unit is
started by the power on link function. (> 27)
Easy setup (> 16)
You can execute basic settings to optimize your home theatre
system.
Default Settings
This returns all values in the Setup menu and the playback
menu, except for “Remote Control”, “On-Screen Language”,
“DVD-Video Ratings” and “BD-Video Ratings” to the default
settings.
DivX Registration (> 22)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit.
Optional speaker sett ing s
1 Select “Test” and press [OK].
A test signal is output.
Front (L) ,) Front (R)
2 Press [OK].
The test signal stops.
≥ No signal is output for the subwoofer. To adjust its volume,
see page 19, Adjusting speaker level during play.
A Test
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
HDMI Colour Mode
This setting is for selecting colour-space conversion of the
image signal when the unit is connected using an HDMI
cable.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Audio will be output through the system's speakers when
"Off" is selected.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
Deep Colour Output
This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
Contents Type Flag is connected.
Power Off Link
Select the desired power off link setting of this unit for
VIERA Link operation (> 27). (This works depending on the
settings of the connected VIERA Link “HDAVI Control”
compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn off automatically.
Video:
When the TV is turned off, this unit will turn off except during
the following conditions:
jCD or MP3 audio playback
jiPod/iPhone mode
jRadio mode
j“AUX”, “ARC” or “D-IN 1” (DIGITAL IN 1) mode
(non-selected TV AUDIO setting for VIERA Link)
j“D-IN 2” (DIGITAL IN 2) mode (non-selected CABLE/SAT
AUDIO setting for VIERA Link)
General
Speaker check
Complete
Tes t
RL
0
dB
SW

SCBT222EBEG_VQT2S28-B.book 34 ページ ２０１０年２月１２日 金曜日 午後１時４分