38
Step 6 : Lift up and remove the SMPS P.C.B. as shown.
Caution: During assembling, ensure that the SMPS P.C.B.
is seated properly on the locators.
11.4.4. Replacement of Switching Regula-
tor IC (IC5701)
• Refer to “Disassembly of SMPS P.C.B.”.
11.4.4.1. Disassembly of Switching Regu-
lator IC (IC5701)
Caution: Handle the SMPS P.C.B. with caution. Avoid
touching the Heatsink Unit A due to it’s high temperature
after prolonged use. Touching it may lead to injuries.
Step 1 : Desolder the pins of Switching Regulator IC (IC5701)
on the solder side of SMPS P.C.B..
To Next Page
Loading...
