39
Step 2 : Remove 1 screw.
Step 3 : Remove the Switching Regulator IC (IC5701) from the
Heatsink Unit A.
11.4.4.2. Assembly of Switching Regulator
IC (IC5701)
Step 1 : Apply Grease on the Heatsink Unit A.
Step 2 : Fix the Switching Regulator IC (IC5701) to the SMPS
P. C .B . .
Caution: Ensure the pins of Switching Regulator IC
(IC5701) seated on the SMPS P.C.B..
Step 3 : Screw the Switching Regulator IC (IC5701) to the
Heatsink Unit A.
Caution: Ensure the Switching Regulator IC (IC5701) is
tightly screwed to the Heatsink Unit A.
To Next Page
Loading...
