40
Step 4 : Solder the pins of Switching Regulator IC(IC5701) on
the solder side of SMPS P.C.B..
11.4.5. Replacement of Rectifier Diode
(D5802)
• Refer to “Disassembly of SMPS P.C.B.”.
11.4.5.1. Disassembly of Rectifier Diode
(D5802)
Caution: Handle the SMPS P.C.B. with caution. Avoid
touching the Heatsink Unit B due to it’s high temperature
after prolonged use. Touching it may lead to injuries.
Step 1 : Desolder the pins of the Rectifier Diode (D5802) on the
solder side of SMPS P.C.B..
Step 2 : Remove 1 screw.
Step 3 : Remove the Rectifier Diode (D5802) from the Heatsink
Unit B.
To Next Page
Loading...
