41
11.4.5.2. Assembly of Rectifier Diode
(D5802)
Step 1 : Apply Grease on the Heatsink Unit B.
Step 2 : Fix the Rectifier Diode (D5802) onto the SMPS P.C.B..
Caution: Ensure the pins of Rectifier Diode (D5802) is
inserted and seated properly on the SMPS P.C.B..
Step 3 : Fix the Rectifier Diode (D5802) onto the Heatsink Unit
B with a screw.
Caution: Ensure the Rectifier Diode (D5802) is tightly
screwed to the Heatsink Unit B.
Step 4 : Solder the pins of the Rectifier Diode (D5802) on the
solder side of SMPS P.C.B..
11.4.6. Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”.
Step 1 : Remove 9 screws.
Step 2 : Release the guides on both sides.
Caution: During assembling, ensure that the Rear Panel is
seated properly onto the guides.
Step 3 : Remove the Rear Panel as arrow shown.
To Next Page
Loading...
