74
11.6.4.2. Assembly of Digital Amplifier IC
(IC5200)
Step 1 : Apply Grease on the IC Insulator at the Heatsink.
Step 2 : Fix the Digital Amplifier IC (IC5200) onto the DAMP
P. C . B . .
Step 3 : Fix the Heatsink Clip onto the Heatsink.
Step 4 : Flip over the DAMP P.C.B. as shown.
Caution : Ensure the Heatsink Clip is fully inserted onto
the Heatsink
Step 5 : Solder pins of Digital Amplifier IC (IC5200).
Caution: Ensure the pins of Digital Amplifier IC (IC5200)
are properly seated on the DAMP P.C.B..
To Next Page
Loading...
