Using the MD group feature
MD editing
31
RQT5975
MD editing operations
1-group play
First create groups (
a
page 29).
1 Press [q/h MD] to select MD as the source then press
[g STOP/CANCEL].
2 Press and hold [u/2 REW/ ] or [1/i /FF] to
select the group.
3 Press [PLAY MODE] to select “1-GROUP”.
4 Press [q/h MD].
Play starts.
5 To play the group repeatedly (1-group repeat)
Press and hold [PLAY MODE] until “REPEAT ON”
appears.
To cancel, press and hold [PLAY MODE] until “REPEAT OFF”
appears.
To cancel
While stopped, press [PLAY MODE] so “1-GROUP” goes out.
MD editing is not possible while in the 1-group mode.
Note
A
To release tracks from a group
To release one group
q Press [EDIT MODE] to select “GROUP?”.
w Press [ENTER].
e Press [u/2 REW/ ] or [1/i /FF] to select “RELEASE?”.
r Press [ENTER].
t Press [u/2 REW/ ] or [1/i /FF] to select group.
y Press [ENTER].
u Press [ENTER].
“UTOC Writing” appears.
To release all groups
q Press [EDIT MODE] to select “GROUP?”.
w Press [ENTER].
e Press [u/2 REW/ ] or [1/i /FF] to select “ALL
RELEASE?”.
r Press [ENTER].
t Press [ENTER].
“UTOC Writing” appears.
B
A
1
To Next Page