Panasonic SC-PM50D - Radio Listening and Tuning; Tuning and Presetting Radio Stations

VQT4L45
19
1. Select FM.
2. To tune in the receivable station
automatically.
- After the "AUTO" blinks on the display for
several seconds, the unit starts to scan up
the band and receive the next receivable
station.
- Receivable station is preset.
- You may listen to the first preset station
automatically.
Listening to the radio
- Unwind the antenna wire, then extend the FM
antenna wire as straight as possible for better
receiving.
Manual tuning
1. Select FM.
2. Tuning
If the d or c button is pressed and hold for
2 seconds, the receivable station will be tuned
automatically.
RADIO
Remote control
d
c
Remote control
Memory presetting
- Up to 20 stations can be preset.
RADIO
Remote control
ANGLE
PROG./
Remote control
Press and hold for 2 seconds.
1. Select FM.
2. Search a receivable station.
3. Preset the station.
4. Repeat steps 2-3 to add more preset
stations. Up to 20 stations can be
preset.
- To overwrite a preset station, please
select a new desired number and preset
directly.
RADIO
Remote control
Remote control
ANGLE
PROG./
Remote control
f
e
ANGLE
PROG./
Remote control
Main unit
f
e
FM antenna wire
Main unit
SELECTOR
Select presetting number.
Automatic presetting
Main unit
SELECTOR
Manual presetting
Selecting a preset station
Main unit
SELECTOR
d
c
PROG.
MHz
STEREO
ROCK
Presetting number
PROG. ROCK
MHz
STEREO
* When an FM stereo broadcast is received
"STEREO" will display. When the reception is
poor, "STEREO" disappears sometimes and
blinks sometimes.
ROCK
MHz
STEREO
*