Adjusting
the speaker
output
level manually
Preparation
• To display the picture.
tum
on the
TV
and select the appropriate video
input mode.
• Press
[+.
- VOL) to adjust the volume to normal listening level.
• Select "TEST TONE" from "SPEAKER
SETIINGS"
in AUDIO menu
(0) 29).
r:.XIT
SETUP
Test tone will
be
output to each channel in
the following order.
LEFT. CENTER, RIGHT.
SURROUND
RIGHT. SURROUND LEFT
AdJust'thespeakeriev"effor
each"~'~""
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
-6
dB to
+6
dB (Factory preset: 0 dB)
•
To
exit the screen. press [SETUP).
l!l
(Effective when playing 5.1-channel sound
or
when "CCPLII" lights,)
<D
Press and hold
[-CH
SELECT]
to
select the speaker.
While the speaker channel is displayed. press
[-GH
SELECT],
L_
C-
R-.
RS-.
L5-
SW
t I
• You can adjust
SW
(Subwoofer) only
if
the
disc
includes a
subwoofer channel and "CCPLII"
is
not lit.
• "S" appears on the main unit's display when you have selected
"S.SRND" (0) 16, Enjoying surround sound effects). In this case.
you can adjust both surround speaker levels
at
the same time using
[A.
~l,
S:
-6
dB
to
+6
dB
® Press
[A]
(increase)
or
[~]
(decrease)
to
adjust
the speaker level
for
each speaker.
C.
RS. LS. SW:
-6
dB
to
+6
dB
(L.
R:
Only the balance
is
adjustable.)
To adjust the balance
of
the front speakers, while "L"
or
"R"
is
selected,
press [
.....
~).
-
To Next Page
Loading...
