Format
Disc
Extension Reference
.
IWMAI
CD·RlRW
'WMA"
• Compatible compression rate: between 48 kbps and
320
kbps
'.wma"
•
You
cannot play
WMA
files that are copy-protected.
• This unit does not support Multiple Bit Rate (MBR: an encoding process for audio content that
produces an audio file encoded at several different bit rates).
1MP31
DVD·RAM
'.MP3"
• This unit does not support
103
tags.
DVD·RlRW
'.mp3"
• Sampling frequency and compression rate:
CD·RlRW
- DVD-RAM, DVD-R/RW:
11.02, 12, 22.05, 24 kHz (8 to 160 kbps), 44.1 and 48 kHz (32
to
320 kbps)
- CD-RlRW:
8,
11.02, 12, 16, 22.05, 24 kHz
(8
to 160 kbps),
32,
44.1 and 48 kHz (32 to
320
kbps)
IJPEQI
DVD·RAM
'.JPG"
• JPEG files taken on a digital camera that conform to DCF Standard (Design rule for Camera File
DVD·RlRW
"jpg"
system) Version 1.0 are displayed.
CD-RlRW
".JPEG"
- Files that have been altered, edited or saved with computer picture editing software may not
be
.
"jpeg"
displayed.
• This unit cannot display moving pictures, MOTION JPEG and other such formats, still pictures other
.
than JPEG (e.g. TIFF), or play pictures with attached audio.
• There may be differences in the display order on the menu screen and computer screen.
• This unit cannot play files recorded using packet write.
DVD·RAM
• Discs must conform to UDF
2.0.
DVD·RlRW
• Discs must conform to UDF bridge (UDF 1.02/1S09660).
• This unit does not support multi-session. Only the default session is played.
CD·RlRW
• Discs must conform
to
IS09660
level 1 or 2 (except for extended formats).
• This unit supports multi-session but if there are many sessions it takes more time for play to start. Keep the number
of
sessions to a minimum to avoid
this.
Maintenance
1. Damage
requiring
service-The
unit should
be
serviced by qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit;
or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change
in
performance; or
(e)The unit has been dropped or the cabinet damaged.
2.
Servicing-Do
not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing
personnel.
3.
Replacement
parts-When
parts need replacing ensure the servicer uses parts specified
by
the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock,
or
other hazards.
4. Safety
check-After
repairs
or
service, ask the servicer to perform safety checks to confirm that the unit is
in
proper working condition.
• Never use alcohol, paint thinner
or
benzine to clean this unit.
• Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Do
not
use
commercially
available
lens
cleaners
as
they
may
cause
malfunction.
Cleaning
of
the lens is generally not necessary although
this depends on the operating environment.
DO DO NOT
~~
Product Service
Wipe with a damp cloth and then wipe dry.
The servicer will require all components to service your system.
Therefore, should service ever be necessary,
be
sure to bring the entire system.
For product information or assistance with product operation:
In the U.S.A. and Puerto Rico, refer to 'Customer Services Directory (United States and Puerto Rico)" on page 36.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
1-800-561-5505, or visit the website (www.panasonic.ca). or
an
authorized
Servicentre closest to you.
-
To Next Page
Loading...
