•
Digital
transmitter"
Center
speaker
Put on a rack or shelf.
Vibration caused by the
speaker can disrupt the
picture
if
it is placed directly
on the
TV.
Surround
speakers
To
allow for proper ventilation and to maintain
good airflow around the main unit, position it with
at least 5
cm
(2")
of
space on all sides.
•
DO
NOT
Notes on speaker use
• Use
only
supplied
speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
•
You
can damage your speakers and shorten their useful life
if
you play
sound
at
high levels over extended periods.
• Reduce the volume
in
the following cases to avoid damage:
- When playing distorted sound.
- When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
- When adjusting the sound quality.
- When turning the unit on or off.
Caution
Do not touch the front netted area
of
the speakers. Hold by the sides.
e.g. Center speaker
The wireless system will automatically seek a clear channel
if
any
of
these
other devices interfere with its communication. When this happens, the
wireless link indicator
("
~
")
flashes on the main unit, and there is a brief
interruption in audio coming from the surround speakers.
This is the normal operation
of
the product working to assure the best
possible performance
of
your home theater system.
If the interference persists, try moving the other devices to another location
outside the range
of
the wireless system or move the wireless system
nearer to the main unit.
" Do not use the wireless system or the digital
transmitter
in
a metal cabinet or bookshelf.
Front
speakers
Caution
• The
main
unit
and
supplied
speakers are
to
be
used
only
as
indicated
in
this
setup. Failure
to
do
so
may
lead
to
damage
to
the
amplifier
and/or
the
speakers, and may
result
in
the
risk
of
fire.
Consult
a
qualified
service
person
if
damage has
occurred
or
if
you
experience a
sudden
change
in
performance
.
• Do
not
attempt
to
attach
these
speakers
to
walls
using
methods
other
than
those
described
in
this
manual.
Wireless
system"
• Place the wireless system within
approximately 15 m (47
ft)
from the
main unit, and in a horizontal position
with the top panel faced upward.
•
To
allow for proper ventilation and to
maintain good airflow around the
wireless system, position it with at least
5
em
(2")
of
space on all sides.
Subwoofer
Place to the right
or
left
of
the
TV,
on the floor
or
a sturdy shelf so that it
will not cause vibration.
Leave about 30
cm
(11'
3115")
from the
TV.
-
step
2
Positioning
If
irregular coloring
occurs
on
your
TV
The center speaker is designed to be used close to a
TV,
but the picture
may be affected with some TVs and setup combinations.
If
this
occurs,
turn
the
TV
off
for
about
30
minutes.
The demagnetizing function
of
the TV should correct the problem.
If
it
persists, move the speakers further away from the
TV.
How you set up your speakers can affect the bass and the sound field.
Note the following points:
• Place speakers on flat secure bases.
• Placing speakers too close to floors, walls, and comers can result
in
excessive bass. Cover walls and windows with thick curtains.
mm
Keep your speakers at least 10 mm ('3hi') away from the system for proper ventilation.
Setup
example
Place the front, center, and surround speakers at approximately the same distance from the seating position. Using "Auto speaker setup"
(Q
12) is a
convenient way to get the ideal surround sound from your speakers when you are unable to place them. The angles in the diagram are approximate.
To Next Page
Loading...
