Speaker control
You can select whether audio is output from this unit's speakers
or
the
TV
speakers by using
the
TV
menu settings. For details, refer
to
the
operating instructions for your
TV.
Home theater
This unit's speakers are active.
• When you turn on this unit, this unit's speakers will
be
automatically
activated.
• When this unit
is
in standby mode, changing the TV speakers to this
unit's speakers in the
TV
menu will automatically
tum
this unit on and
select
"AUX"-
or
"D-IN"-
as
the source.
• The
TV
speakers
are
automatically muted.
• You can control the volume setting using the volume
or
mute
button on
the TV's remote control. (The volume level
is
displayed on the main
unit's display.)
•
To
cancel muting, you can also use this unit's remote control
(Q
38).
•
If
you turn
off
this unit,
TV
speakers will
be
automatically activated.
TV
TV
speakers are active.
•
The
volume
of
this unit is
set
to "0".
- This function works only when "DVD/CD",
"AUX"-
or
"D-IN"- is
selected
as
the source on this unit.
• Audio output is 2-channel audio.
When switching between this unit's speakers and
TV
speakers, the
TV
screen may
be
blank for several seconds.
VIERA Link Control only with TV's remote control
(for "HDAVI Control 2 or later")
You can control the playback menus
of
this unit with the
TVs
remote
control.
When
operating the
TVs
remote control, refer to the below
illustration for operation buttons.
1 Select this unit's operation menu by using the
TV
menu
settings.
(For details, refer to the operating instructions for your TV.)
The START menu will
be
shown.
e.g.lovD-VI
~
OV05/CO~~~~~~~~9r
Playback/menu access
•
The
START menu can also be shown by using a button
on
the
TV's
remote control (e.g. [SUB MENU)).
- When "DVD/CD" is selected
as
the source, the TV's remote control
works only during stop mode.
- This feature
does
not work while the iPod music playback screen
is
displayed on the
TV.
2 Select the desired item on the START menu
(Q
15).
When the on-screen control panel appears
e.g.
I
ovo-vi
(when "Playback Disc" is selected from the START menu.)
You can operate the playback with the indicated controls.
• The on-screen control panel can also
be
shown by using a button on the
TVs
remote control (e.g. [SUB MENU)).
- This works only during "DVD/CD" playback and resume modes
or,
while the iPod music playback screen
is
displayed on the
TV.
mmI
• Depending on the menu, some button operations cannot
be
performed
from the TV's remote control.
• You cannot input numbers with the numbered buttons on the TV's
remote control ([0] to [9)). Use this unit's remote control to select
the
play list etc.
-
To Next Page
Loading...
