This works when the HDMI connection is being
used with "VIDEO PRIORITY"
(Q
29, HDMI
menu) set to "ON".
To
select
suitable
picture
color
with
your
TV
YCbCr
4:2:2"
- Luminance and color details are sent
separately. Most
of
the picture details are in
luminance. The color rate is much higher than
composite video. Compatible with all
TV
models.
YCbCr
4:4:4"
- All color details are sent. Luminance and
color details are in the same signal.
RGB
- Component video type
of
signal.
-
If
the setting above is not compatible with your
TV,
it will not be displayed.
* Terms are descriptions
of
the sample formats
used in digital video.
YCbCr
is a video signal
for luminance (Y), blue (Cb) and red (Cr)
details.
To
select
suitable
picture
quality
with
your
TV
(Video recordings will be converted to, and output
as, high-definition video.)
" 480p1720p/1080p (progressive)
" 480i/1080i (interlaced)
-
If
the picture is distorted, press and hold
[CANCEL) until the picture is displayed
correctly. (The output will return to "480p".)
" The numbers displayed depend on the disc
being played. One
of
the above numbers is
displayed.
This works when the HDMI connection is being
used with "VIDEO PRIORITY"
(Q
29, HDMI
menu) set to "ON".
This works when the HDMI connection is being
used with "VIDEO PRIORITY"
(Q
29, HDMI
menu) set to "ON".
To
sharpen
the
"720p",
"1080i"
and
"1080p"
picture
quality
OFF, 1 (weakest)
to
3
(strongest)
To
show HDMI information.
(Q
below, Confirming HDMI information)
Menu 4 (HOMI)
Automatically detects the film and
video content, and appropriately
converts
it.
In addition to "AUT01",
automatically detects film
contents with different frame rates
and appropriately converts
it.
Select if the video content is
distorted when using "AUT01" or
"AUT02".
AUT02:
VIDEO:
AUT01:
To
make
the
dialogue
in
movies
easier
to
hear
I
OVO-Y
I(Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
OFF, ON
If
you have chosen
"480p"f720p"f1080p"
(progressive), "1080i" (interlaced)
["VIDEO FORMAT" in Menu 4 (HDMI)) or
"PROGRESSIVE" under "VIDEO OUT (lIP)"
(Q
28, VIDEO menu), select the method
of
conversion for progressive output
to
suit the type
of
material.
- The setting will return to "AUT01" when the
disc tray is opened, the unit is turned off or
another source is selected.
Mellows images and enhances
detail
in
dark scenes.
Sharpens images and enhances
detail in dark scenes.
Enhances the contrast for
powerful images.
ANIMATION: Suitable for animation.
To
select
zoom
sizes
NORMAL, AUTO
(I
OVO-YR
II
OVD-Y
II
yeo
I),
x
2,
x 4
-I
JPEG
I:
during pause
To rotate a
picture
(during pause)
IJPEGI:
0.....-.....
90.....-.....180.....-.....270
t t
Menu 3 (Audio)
Menu 2 (Video)
Confirming HOMI information
e.g.
HDMI - INFORMATION
CD
=-
I CONNECTED
STATE
CONNECTED
=-
0J
AUDIO STREAM PCM
\l>------+-
MAX CHANNEL 2ch
®
CD--}
VIDEO FORMAT 720p
5 COLOR SPACE YCbCr 4:4:4
(j)
Connection status
@ Shows the output signal type.
@ Shows the number
of
audio channels.
@(Q
above, VIDEO FORMAT)
®
(Q
above, COLOR SPACE)
..
When "OFF" is selected in "AUDIO OUT"
(Q
29, HOMI menu),
"-
-
-"
will
be displayed
in
"AUDIO STREAM".
N
N
~
a
a:
-
To Next Page
Loading...
