Panasonic SC-VK880

RQTX0286
ENGLISH
Smart control
Simple setup
Selecting the source from the START menu Selecting the source by remote control
You can select desired source or access playback/menus by
using the START menu.
1 Press [START] to show the START menu screen.
This unit automatically turns on. (This works when in
“DVD/CD” or “USB” mode without any disc/device being
loaded/connected.)
Example:
2 Press [OK] to confirm.
Press [START] to exit.•
When “Input Selection” is selected
You can select a desired source from the menu.
DVD/CD, FM, AM, AUX, USB, MUSIC PORT, TAPE
When a disc is loaded or an USB device is connected, you can
also access playback or menus from the START menu.
Example:
When the on-screen control panel appears
Example: [DVDV] (when “Playback Disc” is selected from the
START menu)
You can operate the playback with the indicated controls.
•
OK
RETURN
DVD/CD
Input Selection
MENU (DVD
)
TOP MENU (DVD
)
Playback Disc
DVD-V
DVD-V
OK
RETURN
DVD/CD
Input Selection
Note
Confirm the audio connection to the AUX terminal on the main
unit. Reduce the volume on the TV to its minimum, and then
adjust the volume of the main unit.
Note
DVD/CD: ( page 16)
Each time you press the button:
FM: ( page 26)
AM: ( page 26)
MUSIC PORT: For audio input through the
MUSIC PORT terminal.
AUX: For audio input through the AUX
terminal.
USB: ( page 28)
TAPE: ( page 26)
playback/menu
access
Smart control
1514
1 2 3
SC-VK880_GA_EN.indb 15 5/13/2009 4:04:09 PM