Discs — Convenient functions
1918
Disc information
You can select the disc after checking the discs loaded with the
“DISC CHANGE” screen.
You can also select the disc directly with the disc buttons on the
main unit.
1 Press [DISC] to show the “DISC CHANGE” screen.
Example:
2 Press the numeric buttons ([1] to [5]) to select and play
the disc.
To clear the screen
Press [DISC].
Empty
Not yet read
All CDs play
This function allows you to play all loaded CDs in order and
skips DVD, JPEG, MPEG4 and DivX discs.
While stopped with a CD in the current disc tray
1 Press and hold [–CD MODE].
2 Press [DVD/CD q].
To cancel
Press and hold [–CD MODE] while stopped.
(The function also cancels when you open the current disc tray,
switch the unit to standby or select another source.)
You cannot change the mode during play, or while in program
or random mode.
Video CD playback control is disabled.
•
•
WMAVCD CD
Note
(Only when the elapsed play time can be displayed.
: Works with all JPEG contents.)
During play
Press [REPEAT] to select an item to be repeated.
Example: [dvd-d]
To cancel, select “OFF”.
[note]
Items shown differ depending on the type of disc and playback
mode.
•
JPEG
To mute the sound.
To cancel, press the button again or adjust the volume.
Muting is canceled when you switch the unit to standby.
•
•
Muting the volume
Dimming the display
To dim the display panel.
Every time you press and hold the button:
Dim Original brightness
The display is dimmed, but brightens when you perform some
operations.
•
DVD-V
Repeat play
Note
To Next Page
Loading...
