42
Specifications (continued)
SPEAKER SECTION
Front speakers
Type 2 way, 2 speaker system (Bass reflex)
Speaker unit(s) Impedance 3 Ω
1. Tweeter 6 cm cone type
2. Woofer 20 cm cone type
Input power (IEC) 125 W (Max)
Output sound pressure 87 dB/W (1.0 m)
Frequency range 49 Hz to 21 kHz (-16 dB)
68 Hz to 20 kHz (-10 dB)
Dimensions (WxHxD) 250 mm x 414 mm x 298 mm
Mass 5.3 kg
Surround speakers
Type 1 way, 1 speaker system (Bass reflex)
Speaker unit(s) Impedance 3 Ω
1. Full range 6.5 cm cone type
Input power (IEC) 125 W
8
(Max)
Output sound pressure 80 dB/W (1.0 m)
Frequency range 95 Hz to 25 kHz (-16 dB)
110 Hz to 22 kHz (-10 dB)
Dimensions (WxHxD) 270 mm x 94 mm x 95 mm
Mass 0.9 kg
Center speaker
Type 1 way, 2 speaker system (Bass reflex)
Speaker unit(s) Impedance 6 Ω
1. Full range 6.5 cm cone type
Input power (IEC) 250 W
8
(Max)
Output sound pressure 82 dB/W (1.0 m)
Frequency range 80 Hz to 25 kHz (-16 dB)
96 Hz to 22 kHz (-10 dB)
Dimensions (WxHxD) 270 mm x 94 mm x 95 mm
Mass 1.3 kg
Subwoofer
Type 1 way, 1 speaker system (Bass reflex)
Speaker unit(s) Impedance 6 Ω
1. Woofer 25 cm cone type
Input power (IEC) 250 W (Max)
Output sound pressure 82 dB/W (1.0 m)
Frequency range 48 Hz to 250 Hz (-16 dB)
50 Hz to 200 Hz (-10 dB)
Dimensions (WxHxD) 320 mm x 414 mm x 327 mm
Mass 7.1 kg
GENERAL
Power supply AC 110 to 127 V/220 to 240 V, 50/60 Hz
Power consumption 132 W
Dimensions (WxHxD) 250 mm x 331 mm x 334 mm
Mass 4.9 kg
Operating temperature range 0 °C to +40 °C
Operating humidity range 35 % to 80 % RH (no condensation)
8
Rating with low-cut filter equipped amplifier
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Power consumption in standby mode 0.4 W (approximate)
Note
Specifications
To Next Page
Loading...
