Panasonic TC-32LX70/70

Self-Check Function:
1. Checks the communication IIC bus lines
2. Provides a SOS History
To Access the Self-Check Mode
: Turn the TV on and select an
active channel. While pressing the “VOLUME ( - )” button on the main
unit, press the “OK” button on the remote control for more than 3
seconds.
To Access the Self-Check Mode: Turn the TV on and select an
active channel. While pressing the “VOLUME ( - )” button on the main
unit, press the “OK” button on the remote control for more than 3
seconds.
To Exit the Self-Check Mode, Disconnect the AC cord from the wall outlet.
To Exit the Self-Check Mode, Disconnect the AC cord from the wall outlet.
This procedure is useful to display the unit’s firmware version and check IC data
communications.
37
Self-Check and Reset Function
To Reset the unit: Turn the TV on and select an active channel.
While pressing the “VOLUME ( - )” button on the main unit, press the
“Menu” button on the remote control for more than 3 seconds.
To Reset the unit: Turn the TV on and select an active channel.
While pressing the “VOLUME ( - )” button on the main unit, press the
“Menu” button on the remote control for more than 3 seconds.
The Reset function clears channel programmed settings, picture settings, channel
labels, LOCK mode settings, and password.
It restores the unit to factory shipping settings.