Power LED Blinks 3 Times (TC
Power LED Blinks 3 Times (TC
-
-
32LX85)
32LX85)
88
Pin 10 of connector P3/A3 outputs a high when an over-current condition is detected. On the power
supply board, locate the test points for the SUB9V, SOUND15V, BT30V, and PANEL12V. Using an ohmmeter,
determine if there is a short between each of the test-point and ground. If a test-point is shorted, disconnect the
connector P3 or A3 to isolate the short to either the A or P board.
To Next Page
Loading...
