TC-L32X5
17
7.5. Placement of LVDS Cable
1. Connect the LVDS cable to the panel.
2. Put the A10-K10 cable in the right direction, placing the aluminium tape in the position indicated. Press the tape so it is
properly stuck down.
3. Assemble 2 clampers in the positions indicated.
No. Part Num. Quant. Description
1 TSCKF0010004 1 PC LVDS CABLE
2 T4FP1505J 0.1 MT PET TAPE (0.07 × 7)
3 TMME268 1 PC CLAMPER
To Next Page
Loading...
