TC-L32X5
30
8 Measurements and Adjustments
8.1. Voltage chart of A-board
Set A-Board to a dummy set and check the satisfaction with the specified voltage as following table.
8.2. Voltage chart of P-board
Set P-Board to a dummy set and check the satisfaction with the specified voltage as following table.
Power Supply Name Measurement Point Specification (V) Remark
SUB1.8V TP8700 1.74 - 1.90 -
SUB1.2V TP8000 1.18 - 1.32 -
SUB3.3V TP8701 3.19 - 3.46 -
SUB5V TP8702 4.9 - 5.1 -
STB5V TP5400 4.9 - 5.1 -
VOLTAGE TEST POINT
Specification
Operate STBY
5.8V TP7507 6.2 + 0.5 / -1.0 V 5.6 + 1.1 / -0.85V
15.6V TP7508 15.6 ± 0.8 V -
40V TP7501 40 ± 4V -
To Next Page
Loading...
