TC-L32X5
24
7.12. Cable Alignment
1. Connect the cable that comes on the panel to the P3 connector. During this operation do not pull, just align and connect.
2. Connect the cable already assembled to plate K to the A10 connector; assemble the P2 cable to the A02 and P2 connector
and the A12 cable to the speakers and the A12 connector.
3. Align the cables using the A and B clampers and place tape C on the cables indicator. Ensure the tape sticks to the aluminium
properly (see reference table for alignments).
To Next Page
Loading...
