Panasonic th-42lf80w - Page 101

101
English
Connection terminals
HDMI 1
HDMI 2
TYPE A Connector
*
2
× 2
Audio signal:
Linear PCM (sampling frequencies - 48 kHz,
44.1 kHz, 32 kHz)
DVI-D IN
DVI-D 24 Pin:
Compliance wi h DVI Revision 1.0
Content Protection:
Compatible with HDCP 1.1
DVI-D OUT
DVI-D 24 Pin:
Compliance wi h DVI Revision 1.0
Content Protection:
Compatible with HDCP 1.1
COMPONENT/RGB IN
Y/G
BNC terminal 1.0 Vp-p (75 Ω ) (with sync)
P
B/CB/B
BNC terminal 0.7 Vp-p (75 Ω ) (without sync)
P
R/CR/R
BNC terminal 0.7 Vp-p (75 Ω ) (without sync)
VIDEO IN
VIDEO
BNC terminal 1.0 V [p-p] (75 Ω )
Also used as Y/G terminal
PC IN
High-Density Mini D-sub 15 Pin:
Compatible with DDC2B
Y/G:
1.0 Vp-p (75 Ω) (with sync)
0.7 Vp-p (75 Ω) (without sync)
P
B/CB/B:
0.7 Vp-p (75 Ω) (without sync)
P
R/CR/R:
0.7 Vp-p (75 Ω) (without sync)
HD/VD:
1.0 - 5.0 Vp-p (high impedance)
AUDIO1 IN
Stereo mini jack (M3) 0.5 Vrms
Shared with DVI-D IN and PC IN
AUDIO2 IN
Stereo mini jack (M3) 0.5 Vrms
Shared with COMPONENT/RGB IN and VIDEO IN
AUDIO OUT
Stereo mini jack (M3) 0.5 Vrms
Output:Variable(-∞to0dB)
(1 kHz 0 dB input, 10 kΩ load)
SERIAL IN
External Control Terminal
D-sub 9 Pin:
RS-232C compa ible
SERIAL OUT
External Control Terminal
D-sub 9 Pin:
RS-232C compa ible
LAN (LF8 series)
For RJ45 network connections, compatible with
PJLink
Communication method:
RJ45 10BASE-T/100BASE-TX
DIGITAL LINK/LAN (LF80 series)
For RJ45 network connections, compatible with
PJLink
Communication method:
RJ45 100BASE-TX
IR IN
Stereo mini jack (M3)
IR OUT
Stereo mini jack (M3)
USB
TYPE A USB connector
5V DC / 1A (USB 3.0 is not supported.)