EasyManua.ls Logo

Panasonic th-42lf80w - Digital ZOOM

Panasonic th-42lf80w
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
English
Digital ZOOM
Select the screen areas (25 areas) to zoom in, and
zoom in the selected image areas ×2, ×3 or ×4.
(Use the remote control. The main unit’s buttons cannot
be used for operation.)
Enter
Select
Exit
Digital Zoom
1
Set the digital zoom mode.
Press <ZOOM>.
×
Exit
RE URN
EN ER
The screen aspect is set to [16:9], and the digital
zoom operation guide is displayed.
2
Select the image areas to zoom in.
Select pressing .
×1
Exit
RETURN
ENTER
Digital Zoom operation guide
3
Switch the zoom ratio for the screen
areas.
Switches every time <ENTER> is pressed.
×1 ×2 ×3 ×4
×
×
×
×
●
If no operation is performed for approx. 60
seconds when the zoom ratio for the screen is
“×1”, the unit exits the zoom mode.
●
If no operation is performed for approx. 3 seconds
when the zoom ratio for the screen is “×2”, “×3”
or “×4”, the digital zoom operation guide display
disappears. Pressing any of the
buttons displays the guide again.
4
Exit the digital zoom mode.
Press <RETURN> to exit the mode.
The screen returns to the previous state just before
entering the digital zoom mode, and the digital zoom
opera ion guide display disappears.
●
Press any of the following buttons to exit the
mode. Then, the operation of the pressed button
is performed.
Remote Control:
<AUTO SETUP> <POSITION> <PICTURE>
<INPUT> <SETUP> <SOUND>
<DEFAULT> <RECALL> <MUTE>
<ASPECT> <OFF TIMER> <FUNCTION>
<VOL +> <VOL -> <1>~<6>
Unit:
<INPUT (Unit)> <MENU (Unit)> <+ (Unit)>
<- (Unit)>
<ENTER (Unit)>
●
When the screen saver timer starts up, the digital
zoom mode finishes.
●
When the power is turned OFF, a force-quit is
performed.
When the power is turned OFF by pressing the
standby (ON/OFF) button of the remote control.
When the display is turned OFF at the <Main
Power On / Off button>
When the power is turned OFF by the off-timer
When the power is turned OFF by [No signal
power off] or [Power management].
Note
●
In the following cases, the digital zoom mode is not
available.
When [Multi display setting] is [On]
When he screen saver is in operation
When USB input is selected.
●
The zoomed image is rougher than the original
image.

Table of Contents

Related product manuals