Panasonic th-42lf80w - System and Network Setup; Network Settings Overview

51
English
Date and time
Set date and time. ([- -] shows no programme is set.)
[Date and time] - sub menu screen
Date and time
Set
THURSDAY 10:00
2015/01/01
Year 2015
Month
Day
Hour
Minute
1
1
10
0
■ Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
Set
THURSDAY 10:00
2015/01/01
Year 2016
Month
Day
Hour
Minute
1
1
10
0
Select [Set] and press <ENTER>.
Date and time
Set
FRIDAY 18:00
2016/02/05
Year 2016
Month
Day
Hour
Minute
2
5
18
0
Note
●
If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc. cannot
be made.
●
The present date and ime setting is reset in the
following case.
When the main unit is left unattended for 7 days or
longer after the <Main Power On / Off button> is
turned OFF, the power plug is removed, or power
failure has occurred, etc.
●
Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].
Network settings
Set when networking with a computer.
[Network settings] submenu will be displayed.
LF8
Network settings
Network control
LF8-00
Off
Off
Off
Display name
Network status
LAN setup
AMX D D.
Crestron Connected™
Reset
LF80
Network settings
Serial control
LF80-00
Auto
Off
SERIAL IN
Off
Off
Display name
DIGITAL LINK mode
DIGITAL LINK status
DIGITAL LINK menu
Network status
LAN setup
AMX D.D.
Extron XTP
Crestron Connected™
Reset
OffNetwork control
■ [Serial control] (LF80 series only)
Selects the RS232-C control terminal.
[SERIAL IN]:
Controls using the SERIAL IN terminal of the
display.
[DIGITAL LINK]:
Controls via the optional device that supports
DIGITAL LINK output (ET-YFB100G, ET-
YFB200G) and the DIGITAL LINK / LAN terminal.