Panasonic th-42lf80w - Audio Input and Initial State Settings; Audio Input Select; Initial Input;Volume Settings

63
English
Audio input select
Set up the sound when a video input is selected.
1
Select the video input with .
Set the audio input with
.
HDMI1
HDMI2
DIGITAL LINK
DVI-D
PC
COMPONENT
VIDEO AUDIO2 IN
AUDIO2 IN
AUDIO1 IN
AUDIO1 IN
DIGITAL LINK
HDMI2
HDMI1
Audio input select
Video input Audio input
HDMI1
HDMI1 / AUDIO1 IN /
AUDIO2 IN / No audio
HDMI2
HDMI2 / AUDIO1 IN /
AUDIO2 IN / No audio
DIGITAL LINK
*
1
DIGITAL LINK / AUDIO1 IN /
AUDIO2 IN / No audio
DVI-D / PC /
COMPONENT
*
2
/
VIDEO
AUDIO1 IN / AUDIO2 IN /
No audio
No audio: No audio input (Mute)
*
1: [DIGITAL LINK] is displayed for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
depending on he settings of [Component/RGB-in
select]. (see page 44)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
HDMI1
16:9
AUDIO1 IN
Onscreen display
Set to display / hide he following Onscreen display.
●
Power on display
●
Input signal switch display
●
No signal display
●
MUTE display after displaying he menu screen
●
MUTE and off timer remaining time display after
<RECALL> is pressed
●
Off timer remaining time display when 3 minutes
remaining
[On]:
Displays the Onscreen display.
[Off]:
Hides he Onscreen display.
Initial input
Adjusts the input signal when the unit is turned on.
[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK]
*
1
/
[DVI-D] / [PC] / [COMPONENT]
*
2
/ [VIDEO] / [USB]
*
1: [DIGITAL LINK] is for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-in
select]. (see page 44)
Note
●
This menu is available only when [Input lock] is [Off].
(see page 64)
Initial VOL level
Adjusts the sound volume level when the unit is turned
on.
[Off]:
It will be the sound volume level which had been set
before the power of the unit was turned off.
[On]:
Sets your preferred volume.
●
You can hear the changed volume regardless of your
volume setting before opening the [Options] menu if
you adjust the volume when [Initial VOL level] is [On]
and cursor is on he menu.
■ To adjust sound volume level
Press <VOL +> <VOL ->.
Note
●
When [Maximum VOL level] is [On], the volume
can only be adjusted between 0 and your maximum
range.