Panasonic TH-42PE50B - DVB System Setup; Common Interface Module Access; System Preference Settings

10.2. Initialization Pulse Adjust
1. Input a Cross hatch signal.
2. Set the picture controls: -
Picture mode: Normal
White balance: Cool
Adjust the indicated test point for the specified wave form.
Test point Volume Level
T1 TPSC1 (SC) --- 15 ± 10µ Sec
T2 TPSS1 (SS) VR6557 (SC) 184 + 5µ / - 10µ Sec
29
TH-42PA50E / TH-42PE50B / TH-37PA50E / TH-37PE50B