25
TH-42PH11GK / TH-42PH11MK / TH-42PH11MS
8.17. Removal of V1-Board and V2-
Board
1. Remove the Cabinet.
(Refer to Removal of Cabinet)
2. Remove 12 screws and then remove the Glass Fixed
Plate (A, D).
3. Remove 1 screw (L).
4. Disconnect the connector (V2) and then remove V1-
Board.
5. Remove the Control Button from V2-Board.
6. Disconnect the connector (V15) and then remove V2-
Board.
7. Remove 2 hooks and then remove the Power Button and
Power Button Spring.
8.18. Removal of Plasma Panel
The C1,C2 Boards are connected with the plasma panel for
the repair.
1. Remove 4 screws and then remove the Fan Block.
2. Disconnect the Fan Relay Connectors.
3. Remove 6 screws and then remove the Stand Block (L,
R).
4. Remove the flexible cables from the connectors (DS1,
DS3).
5. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
6. Remove 5 screws and then remove the Slot Block.
7. Disconnect the connector (DN5).
8. Remove 4 screws and then remove DN-Board and Fixed
Plate.
To Next Page
Loading...
