7.17. Removal of the V1-Board and
the V2-Board
1. Remove the Escutcheon.
(Reference to Removal of the Escutcheon)
2. Remove the 5 screws and then remove the Fixed Angle.
3. Remove the 1 screw(K).
4. Remove the operation button from the V2-Board.
5. Disconnect the coupler(V15) and then remove the V2-
Board.
6. Disconnect the coupler(V2) and then remove the V1-Board.
7.18. Removal of the Plasma Panel
1. Remove the each 3 screws ( ) and then remove the Stand
Black(L, R).
2. Remove the each 1 screw (
) and then remove the
Speaker Terminal Black(L, R).
3. Disconnect the couplers(J1, J2, J3, J4, J5, J6, J7, J8, J10,
J15).
4. Remove the 4 screws and then remove the Slot Block.
5. Disconnect the coupler(DA5).
6. Remove the Flexible Cable from the couplers(DA2).
7. Remove the 4 screws and then remove the DA-Board
Block.
15
TH-42PS9UK
To Next Page
Loading...
