Panasonic TH-42PS9UK - Table of Contents; Location of Lead Wiring

1 Applicable signals 4
2 Safety Precautions
5
2.1. General Guidelines
5
3 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
6
4 About lead free solder (PbF)
7
5 PCB Structure sheet of GP9D chassis
8
6 Service Hint
9
7 Disassembly
10
7.1. Removal of the Back Cover
10
7.2. Removal of the HU-Board
10
7.3. Removal of the HA-Board
10
7.4. Removal of the Slot Block
10
7.5. Removal of the J-Board
11
7.6. Removal of the HX-Board
11
7.7. Removal of the DA-Board
11
7.8. Removal of the P-Board
12
7.9. Removal of the D-Board
12
7.10. Removal of the H3-Board (L, R)
12
7.11. Removal of the SU-Board and the SD-Board
12
7.12. Removal of the SC-Board
13
7.13. Removal of the SS-Board
13
7.14. Removal of the C1, C2-Board
13
7.15. Removal of the S1-Board
14
7.16. Removal of the Escutcheon 14
7.17. Removal of the V1-Board and the V2-Board
15
7.18. Removal of the Plasma Panel
15
8 Location of Lead Wiring
18
8.1. Location of Lead Wiring (1)
18
8.2. Location of Lead wiring (2)
18
8.3. Location of Lead wiring (3)
19
8.4. Location of Lead Wiring (4)
19
9 Adjustment Procedure
20
9.1. Driver Set-up
20
9.2. Initialization Pulse Adjust
21
9.3. P.C.B. (Printed Circuit Board) exchange
21
9.4. Adjustment Volume Location
22
9.5. Test Point Location
22
10 Service mode
23
10.1. CAT (computer Aided Test) mode
23
10.2. IIC mode structure (following items value is sample data.)
26
11 Adjustment
27
11.1. RGB white balance adjustment
27
11.2. HD white balance adjustment
29
11.3. Power control adjustment
31
12 Trouble shooting guide
32
12.1. Self Check
32
A
UDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)
PC (HIGH-DENSIT
Y
Mini-D-SUB 15PIN) R,G,B
/
0.7 Vp-p (75Ω)
HD, VD
/
1.0-5.0 Vp-p (high impedance)
Component
Y
:1.0 Vp-p (75Ω: include sync)
P
B
/
C
B
:0.7 Vp-p (75Ω)
P
R
/
C
R
:0.7 Vp-p (75Ω)
A
UDIO IN (M3 JACK) 0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6Ω) 16W [8 W + 8W] (10% THD)
Accessories Supplied
Remote Control Transmitter EUR7636070R
Batteries 2×
AA
Size
Fixing bands (TMME203 or TMME187) × 2
Dimensions (
W
×H×D) 40.2” (1,020 mm) × 24” (610 mm) × 3.5” (89 mm)
Mass (weight)
main unit onl
y
approx. 57.3 lbs
with speakers approx. 66.1 lbs
Notes:
· Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
CONTENTS
Page Page
2
TH-42PS9UK