English
40
Sound Adjustment
1
Press <SOUND> to display the
[Sound] menu.
0
0
0
Sound
Default Default
Output select SPEAKERS
Normal
Off
Sound mode
Bass
Treble
Balance
Surround
2
Select the item to adjust with .
●
Menu that cannot be adjusted is greyed out.
3
Select the desired level with by
listening to the sound.
4
Press <SOUND> to exit from adjust
mode.
■ To return to the previous screen
Press <RETURN>.
■ To reset to defaults
Press <DEFAULT> while the menu is displayed, or
press <ENTER> when [Default] is selected, then the
settings will be set to factory settings.
[Output select] Select the audio output.
[SPEAKERS]: Internal speakers
[AUDIO OUT]: AUDIO OUT
terminal output
●
When [AUDIO OUT] is
selected, the other menus
are greyed out and cannot be
selected.
●
Audio volume setting is
memorized separately for each
output.
[Sound mode]
[Normal]: Emits the original
sound.
[Dynamic]: Accentuates sharp
sound.
[Clear]: Attenuates human
voice.
[Bass] Adjusts low pitch sounds.
[Treble] Adjusts high pitch sounds.
[Balance] Adjusts left and right volumes.
[Surround]
[Off]: Normal sound
[On]: Surround sound
Note
●
[Bass], [Treble] and [Surround] settings are
memorised separately for [Normal], [Dynamic] and
[Clear] in [Sound mode].