Panasonic TH-43LFE8U - Set Up Timer; Date And Time

English
54
Set up timer
Sets the program to turn the power on/off or switch video
inputs at the specified time. Up to 20 programmes can
be set.
Note
●
Set [Date and time] before setting Timer. (see page
54)
●
When multiple programs are set at the same time,
the program with the smallest program number is
enabled.
[Setting Example]
Program 1 Every Monday 12:00
Power On Input: HDMI1
12:00
Set up timer
Program
Timer function
1
On
Power On
HDMI1
Day
Time
Power mode
Input
MONDAY
1
2
3
4
5
6
10:00 THURSDAY 2015/01/01
1. Set the program number.
2. To execute the program, set to [On].
The program is disabled when [Off] is set.
3. Set the day.
The program is executed every day when
[Everyday] is set.
4. Set the power On/Off.
5. Set the time.
Pressing once changes time 1 minute.
Pressing continuously changes time by 15
minutes.
6. Set the input.
Date and time
Set date and time.
([- -] shows no programme is set.)
Date and time
Set
THURSDAY 10:00
2015/01/01
Year 2015
Month
Day
Hour
1
1
10
0
■ Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
Set
THURSDAY 10:00
2015/01/01
Year 2016
Month
Day
Hour
1
1
10
0
Select [Set] and press <ENTER>.
Date and time
Set
FRIDAY 18:00
2016/02/05
Year 2016
Month
Day
Hour
Minute
2
5
18
0
Note
●
If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc.
cannot be made.
●
The present date and time setting is reset in the
following case.
●
When the main unit is left unattended after the power
switch of the main unit is turned OFF, the power plug
is removed, or power failure has occurred, etc.
●
Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].
Minute
Minute