Panasonic TH-43LFE8U - Function Button Settings

57
English
Function button settings
Assigns specific functions to the numeric buttons (<1>
to <6>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with .
On
USB
PC
DVI-D
HDMI2
HDMI1
VIDEO
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guide
Input
Input
↓
Memory load
↓
Shortcut
2
Select the numeric button with
and set the function to assign with
.
■ Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
HDMI1 / HDMI2 / DVI-D / PC / VIDEO / USB
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 45)
[MEMORY1] - [MEMORY6]
[MEMORY1] to [MEMORY6] load functions are already
assigned to <1> to <6> respectively. These settings
cannot be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer],
[Power management settings], [Network settings]
●
Pressing the numeric button displays the menu
screen. Pressing the button again exits the menu
screen.
[AV mute]
●
Pressing the numeric button mutes the audio and
pictures.
To cancel, press any button on the remote control
except Standby (ON/OFF) button.
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input] [Memory load] [Shortcut]
1 HDMI1 MEMORY1 [Signal]
2 HDMI2 MEMORY2 [Screensaver]
3 DVI-D MEMORY3 [Set up timer]
4 PC MEMORY4 [Power
management
settings]
5 VIDEO MEMORY5 [Network settings]
6 USB MEMORY6 [AV mute]
■ Function button guide
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]: Displays the function list for the numeric
buttons.
[Off]: Does not display the function list. Operation
starts when numeric buttons are pressed.
Note
●
When <FUNCTION > is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
To use shortcut (numeric buttons)
1
Press <FUNCTION> or <1> - <6>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
1.
2.
3.
4.
5.
6.
HDMI 1
HDMI 2
DVI-D
PC
VIDEO
USB
Input
2
Press <FUNCTION> to switch function
group.
Example: Memory load
1.
2.
3.
4.
5.
6.
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
Memory load
3
Press <1> - <6>.
The function for the pressed button starts to operate.
Example: When <2> is pressed.
Memory load
Load from “MEMORY2”
Ok Cancel