Panasonic TH-49AF1U - IR IN;IR out Terminal Connection; AUDIO out Terminal Connection

English
28
IR IN/IR OUT terminal connection
Connect the mini plug (M3) cable from the IR OUT
terminal of the first display to the IR IN terminal of the
second display.
The infrared signal of the first display is sent to the
second display.
In this case, the IR (infrared ray reception on the remote
control sensor) on the second display does not operate.
Repeating the above connections enables the daisy
chain connection.
Note
●
Connection cables are not supplied with this unit.
●
Daisy chain connection is possible only between the
displays of the same series.
IR IN
IR OUT
SERIAL
IN
IR IN
IR OUT
IR IN
SERIAL
OUT
IR OUT
SERIAL
IN
Stereo mini plug (M3) cable (commercially available)
First display
Second display
Third display
AUDIO OUT terminal connection
Note
●
Audio equipment and the cable shown are not
supplied with this set.
AUDIO2 IN AUDIO OUT
line-in
Stereo mini plug
(M3)
Stereo audio cable (commercially available)
Audio equipment
Note
●
To output sound from AUDIO OUT terminal of the
unit, be sure to set [Output select] in the [Sound]
menu to [AUDIO OUT]. (see page 70)