Panasonic TH-50PH10BK - Removal of the HX-Board; Removal of the D-Board; Removal of the P-Board; Removal of the DN-Board

6.5. Removal of the HX-Board
1. Remove the HU Terminal Block.
(Reference to Removal of the HU-Board)
2. Remove the Slot Block.
(Reference to Removal of the Slot Block)
3. Remove the DS-Board.
(Reference to Removal of the DS-Board)
4. Remove 2 screws and then remove the Slot Case.
5. Remove 4 Hexagonal-Head screws and 2 screws and then
remove the HX-Board.
6.6. Removal of the D-Board
1. Remove the Slot Block.
(Reference to Removal of the Slot Block)
2. Disconnect the connectors (D5, D25).
3. Remove the Flexible Cable from the connectors (D20, D31,
D32).
4. Remove 4 screws and then remove the D-Board.
6.7. Removal of the P-Board
1. Disconnect the connectors (P2, P6, P7, P9, P11, P12,
P25).
2. Remove 6 screws (
) and then remove the P-Board Block.
6.8. Removal of the DN-Board
1. Remove the flexible cable from the connectors (DN1).
2. Disconnect the connectors (D6, D31, D33, D35).
3. Remove 4 screws and then remove the DN-Board.
10
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES