Panasonic TH-50PH10BK - Removal of the Plasma Panel

6.20. Removal of the Plasma Panel
1. Disconnect the Fan Relay connectors.
2. Remove each 3 screws (
) and then remove the 2 Fan
Blocks.
3. Remove each 4 screws (
) and then remove the Stand
Black(L, R).
4. Remove each 1 screws (
) and then remove the Speaker
Terminal Block(L, R).
5. Disconnect the connectors (DS1, DS2, DS4, DS6, DS7,
DS8, DS14, DS15).
6. Remove 4 screws and then remove the Slot Block.
7. Disconnect the connectors (DN6, DN31, DN33, DN35).
8. Remove the Flexible Cable from the connector (DN1).
9. Remove 4 screws and then remove the DN-Board Block.
10. Disconnect the connectors (P2, P6, P7, P9, P11, P12,
15
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES