Panasonic TH-50PH10BK - Removal of the H3-Board (L, R); Removal of the SU-Board and the SD-Board; Removal of the SC-Board; Removal of the SS2-Board and the SS3-Board

6.9. Removal of the H3-Board (L,
R)
1. Remove each 1 screw and then remove the Speaker
Terminal Block (L, R).
2. Disconnect the connector (H37).
3. Remove 3 screws (F) and then remove the H3-Board.
6.10. Removal of the SU-Board and
the SD-Board
1. Remove the Speaker Terminal Block(R).
(Reference to Removal of the H3-Board (L, R))
2. Remove the Flexible cables (SU1, SU2, SU3, SU4,)
connected to the SU-Board and remove the connector
(SC45-SU45).
3. Remove 6 screws.
4. Slide the SU-Board to the left to disconnect from a
connector (SC41-SU41) on the SC-Board and remove the
SU-Board.
5. Disconnect the connectors(SU45, SD46).
6. Slide the SU-Board and the SD-Board to the left, remove
the SU-Board and the SD-Board from the connectors
(SC41, SC42).
6.11. Removal of the SC-Board
1. Remove the SU-Board and SD-Board (Reference to
removal SU-Board and SD-Board).
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove 9 screws (
) and then slide the SC-Board to the
right.
6.12. Removal of the SS2-Board and
the SS3-Board
1. Disconnect the connector (SS23).
2. Disconnect the Flexible Cable (SS52).
11
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES