Panasonic TQB2A0952 - Quick Reference Control Operation (Remote)

Quick Reference Control Operation (Remote Control)
O Power Button - Press to turn ON or OFF. (pg.12)
Q Volume Buttons - Press to adjust Sound Level. Press to adjust Audio Menus, Video Menus and select operating
features when menus are displayed. (pg.12)
Q Channel Buttons - Press to select programmed channels. Press to highlight desired features when menus are
displayed. Also used to select Cable Converter box channels after programming Remote Control Infra-red codes
(the TVNCR/CABLE switch must be set in CABLE position). (pg.12)
Q Action Button - Press todisplay Main Menu and access or exit On Screen feature and Adjustment Menus. (pg.16)
Q V/Video Button - Press to select TV or one of two (2) Video Inputs,forthe Main Picture or the PIP frame (when
the PIP frame is displayed). (pg.13)
Q Multi Button - Programmable to operate up to six Remote Function buttons. (pg.13)
O Mute Button - Press to mute sound. A second press returns sound. (pg.12)
Q R-Tune (Rapid Tune) Button - Press to switch between two channels. (pg.13)
Q Recall Button - Press to display Time, status of Sleep Timer, Channel, Video Mode, Channel Caption (Station
Identifier) and Audio Mode. (pg.13)
(_ Keyboard "0 through 9" Buttons - Press desired channel number to access any channel. (pg.12)
O VCR Function Buttons - Programmable to operate many brands of VCR's. (pg.12)
Q Cable Power Button - Programmable to operate selected CATV converter boxes. (pg.14)
Q PIP (Picture In Picture) Button - Press to display the PIP frame, press again to remove PIP frame. (pg.14)
Q PIP Swap Button - Press to interchange PIP frame with Main Picture (when the PIP frame is displayed). (pg.14)
(_ PIP Size Button - Press to select size of PIP frame (when the PIP frame is displayed). (pg.14)
O PIP Move Button - Press to position PIP frame to any corner of the Main Picture (when PIP frame isdisplayed).
(pg.15)
Q IP Freeze Button - Press to stop action in the Main Picture or PIP frame (when the PIP frame is displayed).
(pg.15)
Q V/VCPJCABLE Switch - This switch isused to select the proper mode when programming Remote Control Infra
red codes or operating the TV or external equipment (VCR or Cable TV Converter box). (pg.38)
-11 -